戴明循环在手术设备管理中的应用

Abstract
Figure/Table
References (16)
Related Citation (15)

Download: PDF (0 KB) HTML (38 KB)
Export: BibTeX | EndNote (RIS)

Abstract Objective To explore the application effect of Deming cycle (PDCA) in the management of surgical equipment. Methods The current situation of intraoperative fault management of surgical equipment in traditional management method from January to April 2018 were analyzed, and the causes of these problems were also analyzed, and then the fishbone diagrams according to Pareto′s law was drew to determine the main factors, and formulated plans and goals.From May to October 2018, PDCA was used to manage the surgical equipment, so as to strengthen the standardized training of surgeons and operating room nurses on equipment operation, draw flow charts for equipment usage, formulate assessment standards, intensify maintenance and test after equipment use, check the feedback and continuing to improve quality. The incidence of surgical equipment failures, the goal achievement rate, and the incidence of adverse events before and after PDCA management were compared. Results After using PDCA to manage the surgical equipment, the incidence of surgical equipment failures was effectively reduced, and the improvement target value was achieved. The standard rate was 107.91%, and the improvement rate was 75.15%, which ensured the patients′ surgical safety. The incidence of intraoperative equipment failure after PDCA implementation (2.84%) was lower than that before PDCA implementation (11.43%), the difference was statistically significant (χ2=8.23, P＜0.01). After PDCA implementation, CQI team members were growing in team spirit, quality control techniques, communication and coordination,professional knowledge, activity confidence, responsibility and honor. Conclusion PDCA applying to the fault management of surgical equipment can effectively increase the surgical safety for patients, achieve continuous improvement of medical quality, and improve the working competence and motivation of circle members.

Key words： Deming cycle Operating room Nursing quality management Equipment management

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIANG Li-chun
	CHEN Pei-jun
	GUO Lv-ping
	LIU Yang
	YE Yan-xia
	CHEN Guo-min
	SHAO Bing

Cite this article:

LIANG Li-chun,CHEN Pei-jun,GUO Lv-ping, et al. Application of Deming cycle in management of surgical equipment[J]. 中国当代医药, 2020, 27(6): 189-192.

URL:

http://dangdaiyiyao.com/EN/ OR http://dangdaiyiyao.com/EN/Y2020/V27/I6/189

[15]	陈琳，杨隆秋，汪晓玲.运用管理降低麻醉前设备准备的缺陷率[J].麻醉安全与质控，2019，3（2）：93-96.
[16]	王吉善，陈晓红.从经验管理走向科学管理：医院管理工具应用案例集[M].北京：科学技术文献出版社，2014.
[1]	廖晓骏，徐玉霞，曹芳，等.品管圈在降低手术室腔镜设备故障率的应用体会[J].医学信息，2016，29（6）：56-57.
[2]	范清刚，范津菘，李峰，等.戴明循环理论的活动在我院手术室仪器设备管理中的应用[J].现代医用影像学，2019，28（4）：783-784.
[3]	刘亮，王慧宇，郭大为，等.循环法在提高麻醉机使用安全性中的应用[J].中国医疗设备，2018，33（4）：143-146.
[4]	郑树森.医院品管圈辅导手册[M].北京：人民卫生出版社，2012.
[5]	Juran JM，Godfrey AB.Juran′s quality handbook，New York：McGraw-Hill[M].Mcgraw Hill Book Co，1999.
[6]	裴一洲，陈磊，晁飞.现代医院医疗设备管理持续质量改进的模式与方法[J].基层医学论坛，2019，23（28）：4119-4121.
[7]	黄素珍，高泽伟，陈武胜，等.PDCA 循环法在手术室护理质量管理中的应用效果[J].中国当代医药，2019，26（18）：166-168.
[8]	董成红.PDCA 循环法在手术室护理质量管理中的应用[J].实用临床护理学电子杂志，2019，4（30）：167，178.
[9]	郑凯龙.PDCA 循环法在手术室护理质量管理中的应用研究[J].中国卫生标准管理，2017，8（4）：146-148.
[10]	李春玲，廖春莲.PDCA 循环法在手术室护理质量管理中的应用效果[J].中国当代医药，2018，25（32）：137-139.
[11]	米树丽.品管圈活动在手术室仪器设备管理中的实施效果分析[J].中国医疗器械信息，2019，25（5）：170-171.
[12]	廖春花，曹扬，邹庆辉，等.大型手术室医疗仪器设备的精细化管理[J].中国医疗设备，2019，34（6）：121-123.
[13]	赵今.PDCA 持续质量改进管理模式在医院手术室设备管理中的价值分析[J].中国卫生产业，2019，16（21）：51-52.
[14]	曾因明.麻醉科医疗质量控制工作的常态运行与持续改进[J].麻醉安全与质控，2018，2（2）：119-121.