低温等离子体灭菌器配合全程质控管理对消毒供应室器械灭菌效果及工作质量的影响

Abstract
Figure/Table
References (15)
Related Citation (4)

Download: PDF (0 KB) HTML (34 KB)
Export: BibTeX | EndNote (RIS)

Abstract Objective To explore the effect of low-temperature plasma sterilizer with full-process quality control management on the sterilization effect and work quality of the equipment in the sterilization supply room.Methods From May 2019 to February 2020 (before the implementation of low-temperature plasma sterilizer combined with full-process quality control management), 320 medical devices in the sterilization supply room of Yunfu Hospital of Traditional Chinese Medicine were randomly selected as the control group.From March 2020 to December 2020 (after the implementation of low-temperature plasma sterilizers and full-process quality control management), 320 medical devices in the sterilization supply room of Yunfu Hospital of Traditional Chinese Medicine were randomly selected as the research group.The control group used the low-temperature plasma sterilizer with routine management, while the research group used the low-temperature plasma sterilizer with full-process quality control management.The sterilizing effect, working quality and management satisfaction of the sterilization supply room were compared between the two groups.Results The biomonitoring qualification rate of the research group (100.0%) was higher than that of the control group (76.8%),and the difference was statistically significant (P＜0.05).The unqualified rate of device recovery (1.56%), cleaning(0.94%), packaging (0.13%) and device distribution error (0.03%) in the research group were lower than those in the control group (9.06%, 8.13%, 9.69%, 5.63%), and the differences were statistically significant (P＜0.05).The total satisfaction of device management in the research group (95.00%) was higher than that in the control group (80.00%), and the difference was statistically significant (P＜0.05).Conclusion The combination of low-temperature plasma sterilizer and full-process quality control management enhances the sterilization effect and work quality of the equipment in the sterilization supply room, and improves the satisfaction of the hospital staff on the quality of the equipment.

Key words： Sterilization supply room Low-temperature plasma sterilizer Full-process quality control management

Received: 19 April 2021

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

URL:

http://dangdaiyiyao.com/EN/ OR http://dangdaiyiyao.com/EN/Y2021/V28/I20/219

[1]	万雪英.复用医疗器械多酶清洗在消毒供应室的重要作用分析[J].湖南中医药大学学报，2018，8（A1）：125-126.
[2]	黄倩，黄伟玲，陈惠玲，等.质量敏感指标在消毒供应室管理中的应用效果[J].中华现代护理杂志，2020，26（10）：1341-1343.
[3]	刘春宇.消毒供应室的潜在风险分析及处理对策[J].山西医药杂志，2020，49（9）：107-108.
[4]	刘珍青，李娜，李彦珺.消毒供应室的质量控制与医院感染控制的研究[J].实用临床医药杂志，2018，22（18）：59-61.
[5]	田岚，张丽洁，白钰.根本原因分析及追踪法在消毒供应中心的应用效果[J].传染病信息，2020，33（2）：96-99.
[6]	胡国庆，段亚波.GB15982-2012《医院消毒卫生标准》新变化[J].中国感染控制杂志，2013，12（1）：1-4.
[7]	卫生部.医院消毒供应中心第2 部分：清洗消毒及灭菌技术操作规范[J].中国护理管理，2009，9（6）：27-32.
[8]	张玉桂，黄正新，白姣.实用消毒供应中心管理规范及指导[M].湖北：湖北科学技术出版社，2012.
[9]	张俊英.加强医院消毒供应室工作各环节的质量管理控制医院感染[J].实用心脑肺血管病杂志，2017，9（S1）：224-226.
[10]	钱萍，马琼.消毒供应中心护理人员的职业防护[J].华南国防医学杂志，2018，32（12）：879-880.
[11]	陈建秀，顾美君.医院供应室的管理与技术解析[J].湖南中医药大学学报，2018，21（1）：672-673.
[12]	王曼维，郭榕晨，龚雪涛.消毒供应室实施全程质量控制管理对医院感染的干预作用[J].长春中医药大学学报，2019，35（4）：731-735.
[13]	林栓琴.护理管理在消毒供应室护理中的重要性分析[J].中国医疗设备，2018，33（S2）：136-137.
[14]	鲁夏云，李青红，王荣华，等.消毒供应中心应用智溯干预方案对医院感染的影响[J].医学临床研究，2017，34（10）：1979-1980.
[15]	林英，朱小琼，李惠玲.消毒供应中心手术器械清洗质量管理模式的实施在预防院内感染中的应用价值分析[J].成都医学院学报，2020，15（3）：383-387.