3D打印技术辅助治疗不稳定性骨盆骨折的临床效果

Abstract
Figure/Table
References (15)
Related Citation (15)

Download: PDF (0 KB) HTML (36 KB)
Export: BibTeX | EndNote (RIS)

Abstract Objective To explore the clinical effect of 3D printing technology in the assisted treatment of unstable pelvic fractures.Methods The clinical data of 50 patients with unstable pelvic fractures admitted to Huiya Hospital of the First Affiliated Hospital,Sun Yat-sen University from January 2015 to December 2019 were retrospectively analyzed.According to the different treatment methods,they were divided into the routine group(n=25)and the study group(n=25).The routine group was treated with post erior approach,sacroiliac joint fixed with spinal pelvic fixation,and the study group was treated with 3D printing technique on the basis of routine group.The operative time,intraoperative bleeding volume,screw dislocation rate,fracture reduction quality,pelvic function recovery and complications were compared between the two groups.Results The operation time in the study group was shorter than that in the routine group,the intraoperative bleeding volume and screw dislocation rate of the study group were less than those of the routine group,the differences were statistically significant(P＜0.05).There was no significant difference in fracture reduction quality in the two groups(P＞0.05).There was no significant difference in the quality of pelvic function recovery in the two groups(P＞0.05).The total incidence of complications in the study group was lower than in the conventional group,and the difference was statistically significant(P＜0.05).Conclusion 3D printing technology in the assisted treatment of unstable pelvic fractures,pelvic fracture repair in advance to carry out accurate evaluation norms,help to shorten the operation time,reduce surgical trauma and complications,and has good fracture repair quality and functional recovery effect.

Key words： 3D printing Post erior approach,sacroiliac joint fixed with spinal pelvic fixation Unstable pelvic fracture Complications

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIANG Jian-bin
	YAO Fu-hua▲
	HUANG Jian-hua

Cite this article:

LIANG Jian-bin,YAO Fu-hua▲,HUANG Jian-hua. Clinical effect of 3D printing in the assisted treatment of unstable pelvic fractures[J]. 中国当代医药, 2021, 28(17): 25-28.

URL:

http://dangdaiyiyao.com/EN/ OR http://dangdaiyiyao.com/EN/Y2021/V28/I17/25

[1]	孙晓，霍永峰，殷昭阳，等.不稳定型骨盆骨折患者采用钢板内固定联合外固定治疗的有效性分析[J].中国急救医学，2016，36（2）：66-67.
[2]	董金磊，李庆虎，周东生，等.早期腹膜外骨盆填塞联合暂时性腹主动脉阻断治疗血流动力学不稳定骨盆骨折[J].中华创伤杂志，2018，34（1）：40-45.
[3]	陈群.内外固定手术联合治疗不稳定性骨盆骨折82 例的临床效果观察[J].中国医疗器械信息，2015，（21）：87.
[4]	聂文波，汪明星，王国昌，等.微创切口结合3D打印技术在骨盆骨折前环损伤中的应用[J].中国伤残医学，2019，27（8）：14-17.
[5]	郭永红，王文革，李仕臣，等.3D打印技术辅助下微创手术治疗复杂骨盆骨折[J].中国实用医刊，2017，25（11）：45-48.
[6]	吴超，邓佳燕，谭伦，等.3D打印技术辅助骶髂关节螺钉置入联合前环钉棒系统治疗不稳定型骨盆骨折[J].中华创伤骨科杂志，2018，20（11）：986.
[7]	杨新明，张瑛，孟宪勇.骨与关节损伤[M].北京：科学技术文献出版社，2012：46-47.
[8]	Matta JM.Fractures of the acetabulum: accuracy of reduction and clinical results in patients managed operatively within three weeks after the injury[J].J Bone Joint Surg Am，1996，78（11）：1632-1645.
[9]	Majeed SA.Grading he outcome of pelvis fractures[J].J Bone Joint Surg Br，1989，71（2）：304-306.
[10]	李琳，于震，王琦，等.髂腰固定联合内置固定架+钢板固定治疗Tile C3 型骨盆骨折肥胖患者的疗效[J].中华创伤杂志，2020，36（9）：810-815.
[11]	刘国雄，肖柳斌，李鹏飞，等.内、外固定与保守方法治疗不稳定型骨盆骨折：骨痂生长及骨折愈合率比较[J].中国组织工程研究，2015，19（35）：5646-5651
[12]	王鉴顺，蔡乐益，楼溢程，等.3D打印技术辅助下空心螺钉微创固定治疗不稳定型骨盆骨折[J].2017，19（3）：240-244.
[13]	孙建，郝连升，王洪超，等.3D打印联合椎弓根钉棒系统重建技术在腰椎滑脱手术中的临床研究[J].中国伤残医学，2018，26（5）：11-12.
[14]	陈向波，陈斌，李涛，等.3D打印技术辅助前侧微创入路手术治疗不稳定型骨盆骨折的临床疗效分析[J].现代生物医学进展，2018，18（12）：135-138.
[15]	吴超，邓佳燕，谭伦，等.3D打印技术辅助不稳定性骨盆骨折手术疗效分析[J].中国修复重建外科杂志，2019，33（4）：455-461.