3D打印辅助跗骨窦小切口治疗跟骨骨折的效果观察

Abstract
Figure/Table
References (15)
Related Citation (15)

Download: PDF (0 KB) HTML (29 KB)
Export: BibTeX | EndNote (RIS)

Abstract ObjectiveTo observe the clinical efficacy of 3D printing assisted reduction and internal fixation with tarsal sinus small incision in treatment of calcaneal fractures.Methods 42 patients with intra-articular calcaneal fractures treated in Xintang Hospital from January to December 2016 were selected as the subjects,and divided into experimental group and control group,21 cases in each group.The control group were given conventional calcaneal lateral"L"type extended incision reduction plate internal fixation,the patients in the experimental group were treated with 3D printing assisted minimally invasive reduction and internal fixation of the tarsal sinus.The postoperative fracture healing and clinical recovery effect were observed and compared between the two groups.Results The Bohler angle and Gissane angle in the experimental group were better than those in the control group after the treatment.The excellent and good rate of calcaneal treatment in the experimental group was significantly better than that in the control group 9 months after operation.The incidence of adverse reactions in the experimental group (9.5%)was significantly lower than that in the control group(19.0%),the differences were statistically significant(P＜0.05).Conclusion The treatment of intra-articular calcaneal fractures with 3D printing assisted reduction and internal fixation with small incision of the tarsal sinus is beneficial to the reduction of calcaneal fractures,shortening the healing time of calcaneal fractures and reducing the incidence of adverse reactions.

Key words： 3D printing Small incision of tarsal sinus Internal fixation Calcaneal fracture

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LU Zhi-wen
	YE Qing-lin
	WU Bai-chu
	LUO Ji-wei

Cite this article:

LU Zhi-wen,YE Qing-lin,WU Bai-chu, et al. Effect observation of 3D printing assisted small incision of tarsal sinus in the treatment of calcaneal fractures[J]. 中国当代医药, 2018, 25(7): 90-92转99.

URL:

http://dangdaiyiyao.com/EN/ OR http://dangdaiyiyao.com/EN/Y2018/V25/I7/90

[1]	翁万青，田乃锋，王鉴顺，等.三维重建虚拟置钉指导前路寰枢椎侧方关节螺钉内固定和齿状突螺钉内固定：3D打印模型的实验研究[J].中华创伤骨科杂志，2016，18（1）：24-28.
[2]	吴爱悯，金海明，车灿文，等.上颈椎3D打印模型的精确性验证及在前路枕-寰-枢螺钉内固定术中的可行性[J].中华创伤杂志，2016，32（1）：41-46.
[3]	杨泗华，张翔，于一凡，等.3D打印辅助经后路椎弓根钉棒内固定治疗强直性脊柱炎合并胸腰段椎体骨折的临床应用研究[J].中国数字医学，2016，11（7）：77-81，87.
[4]	马肃霜，陈劲，钟华，等.3D打印辅助桥接内固定系统治疗股骨多段骨折[J].中国骨科临床与基础研究杂志，2017，9（2）：98-103.
[5]	韩生寿，白文斌，王凯，等.骶骨肿瘤手术治疗及TSRH-3D脊柱内固定系统的应用价值[J].中国医药导刊，2014，6（8）：1190-1192.
[6]	李浩，李承鑫，张学军，等.3D打印模型辅助后路内固定治疗儿童颈椎畸形[J].中华小儿外科杂志，2015，36（3）：192-196.
[7]	吴长福，郑祖高，陈宣煌，等.基于3D打印股骨远端骨折标准件库接骨板的数字化内固定[J].中国组织工程研究，2016，20（13）：1895-1903.
[8]	马龙祥，栗超跃，史锡文，等.基于3D打印模型辅助后路内固定治疗寰枢椎不稳定[J].中国实用神经疾病杂志，2016，19（7）：88-90.
[9]	宋永焕，林大木，丁健，等.3D微型钢板内固定治疗掌指骨骨折的近期疗效观察[J].中华手外科杂志，2014，30（2）：113-114.
[10]	林海滨，黄文华，陈宣煌，等.基于3D打印和接骨板标准件库数字化的股骨远端骨折内固定[J].中华医学杂志，2016，96（5）：321-348.
[11]	李海燕，万红，周连军，等.TSRH-3D椎弓根螺钉系统复位并椎弓根内固定治疗多节段腰椎骨折的中远期疗效分析[J].临床和实验医学杂志，2014，15（17）：1416-1419.
[12]	郑锋，陈旭，陈宣煌，等.数字化设计及3D打印在髋臼骨折内固定术中的应用研究[J].医学理论与实践，2017，30（12）：1736-1738.
[13]	黄家生，云致硕.3D打印技术在跟骨骨折手术治疗中的应用[J].中国医药科学，2016，6（10）：198-200.
[14]	杨晶.计算机辅助设计3D打印技术在复杂跟骨骨折治疗中的应用[J].国际骨科学杂志，2017，38（1）：51-54.
[15]	焦杰君.3D打印骨折模型定制钢板在复杂骨折中临床应用分析[J].临床医药文献电子杂志，2017，4（31）：6004.