|
|
Application of 3D printing model in surgery for high-energy intra-articular fracture |
LI Chang-jie MAO Wen-jing ZHOU Chong-gang YU Xue-wen LYU Sui-ben |
The Second Department of Orthopedics,Jiujiang Traditional Chinese Medicine Hospital,Jiangxi Province,Jiujiang 332000,China |
|
|
Abstract Objective To explore the effect of 3D printing model on the treatment of patients with high energy intra-articular fracture surgery.Methods A total of 40 patients with high-energy intra-articular fracture who were treated in our hospital from December 2017 to December 2018 were selected as the research subjects.All the patients were divided into control group and observation group according to the odd and even numbers of beds on admission,20 cases in each group.The control group underwent routine open reduction and special-shaped plate internal fixation,and 3D printing technology was used to print high-energy joint fracture model in observation group before surgery,and then the individualized surgical plan was designed based on the model.The clinical surgical indexes were compared between the two groups.The rehabilitation and ankle joint function were compared between the two groups after 12 months of postoperative follow-up,and the incidence of complications was recorded.Results The operation time of the observation group was shorter than that of the control group,and the intraoperative blood loss was less than that of the control group,the differences were statistically significant (P<0.05) As time went by,the postoperative swelling degree and visual analogue scale (VAS) score of the two selected groups became lower and lower,and the weight bearing situation became better and better; After surgery for 1,3,6 and 12 months,the swelling degree and VAS score of observation group were lower than those of the control group,and the weight-bearing score was higher than that of the control group,the differences were statistically significant (P<0.05).As time went by,the joint function scores of the two groups of candidates were getting higher and higher.The scores of joint function in observation group were higher than those of the control group after surgery for 1,3,6 and 12 months,the differences were statistically significant (P<0.05).There was no statistically significant difference between the two groups in the total incidence of complications (P>0.05).Conclusion 3D printing model in treatment of patients with high-energy intra-articular fracture surgery can shorten operation time,reduce intraoperative bleeding volume,promote rehabilitation,enhance recovery of joint function,and not increase complications.
|
|
|
|
|
[6] |
赵朝锋,高泉阳,张天健,等.手法闭合复位结合外固定架治疗儿童肱骨干骨折的临床观察[J].中国骨伤,2017,30(7):622-626.
|
[7] |
刘颖,刘显东,曹万军,等.持续被动运动对胫骨平台骨折术后膝关节功能恢复的影响[J].中华物理医学与康复杂志,2017,39(7):531-533.
|
[8] |
张鹰,努尔波力,陆战新,等.3D 数字骨科技术在踝关节骨折手术治疗中的研究与应用[J].中国数字医学,2017,12(2):28-30.
|
[9] |
赵亮,王宝军,高化,等.术前X线、CT 三维及二维影像重建对桡骨远端不稳定性骨折的评估意义[J].临床和实验医学杂志,2017,16(8):823-825.
|
[10] |
毛立华,吴兴国.64 排螺旋CT 三维重建对踝关节细微骨折的临床价值分析[J].医学影像学杂志,2017,27(7):1418-1420.
|
[11] |
邵佳申,常恒瑞,郑占乐,等.3D打印辅助手术治疗胫骨平台骨折疗效的Meta 分析[J].中国组织工程研究,2017,21(23):3767-3772.
|
[12] |
黄智勇,苏丽萍,蓝孝全,等.3D打印骨折模型在复杂股骨远端骨折修复中的应用价值[J].中国组织工程研究,2019,23(12):1859-1863.
|
[5] |
仇道迪,周东生,许维澄,等.3D打印技术在陈旧性骨盆髋臼骨折治疗中的应用[J].中华创伤骨科杂志,2017,19(7):624-629.
|
[1] |
田可为,陈柯.3D打印技术在全髋关节置换术治疗髋臼骨折并发股骨头缺血性坏死和创伤性关节炎中的应用[J].中医正骨,2017,29(3):42-44.
|
[2] |
何藻鹏,李卫,刘金伟,等.3D打印技术在SandersⅢ型跟骨骨折内固定手术设计中的应用[J].中华创伤骨科杂志,2017,19(9):791-796.
|
[3] |
李仁嵩,王娜.3D打印个体化模型在复杂踝关节骨折治疗中的应用[J].组织工程与重建外科杂志,2018,14(4):208-211.
|
[4] |
张华明,岑怡彪,钟华,等.3D打印技术辅助双钢板个性化手术治疗AO-C型肱骨远端骨折[J].中国骨与关节损伤杂志,2017,32(11):1152-1154.
|
[13] |
刘海棠,欧治平,谢沛军,等.3D打印技术在踝关节骨折手术中的应用[J].中国伤残医学,2017,25(23):23-24.
|
[14] |
张文玺,王新明,吉跃平,等.基于3D打印的骨折复原技术在胫腓骨远端骨折中的应用[J].中华创伤骨科杂志,2017,19(7):589-595.
|
[15] |
杨光,邓飞,张永弟,等.利用3D打印技术实现骨盆骨折手术导板的设计制造[J].机械设计与制造,2017,(1):201-204.
|
|
|
|