全数字化设计与3D技术辅助腰椎椎间孔镜手术的临床研究

Abstract
Figure/Table
References (15)
Related Citation (8)

Download: PDF (0 KB) HTML (32 KB)
Export: BibTeX | EndNote (RIS)

Abstract Objective To explore the effect of full digital design and 3D technology assisted lumbar intervertebral foramen endoscopic surgery.Methods Clinical data of 40 patients with lumbar disc herniation and lumbar spinal stenosis admitted to General Hospital of Pingxiang Mining Group Co., Ltd.from August 2018 to August 2019 were retrospectively analyzed.According to the operation method, they were divided into control group (20 cases) and observation group (20 cases).The control group was treated with conventional intervertebral foramen endoscopic surgery, while the observation group was treated with full digital design and 3D technology assisted lumbar intervertebral foramen endoscopic surgery.The clinical efficacy, operation and complications were compared between the two groups.Results There was no significant difference in the total effective rate between the two groups at 1, 3, 6 months and 1 year after operation (P＞0.05).The puncture time and operation time of the observation group were shorter than those of the control group, and the number of fluoroscopy and intraoperative blood loss were less than those of the control group, the differences were statistically significant (P＜0.05).Following up for 1 year, the total occurrence rate of the observation group was lower than that of the control group, and the difference was statistically significant (P＜0.05).Conclusion The full digital design and 3D technology assisted lumbar intervertebral foramen endoscopic surgery has a significant effect,which is conducive to the smooth operation and less postoperative complications, and is worthy of clinical promotion.

Key words： Lumbar intervertebral foramen endoscopic surgery Full digital design 3D technology Fluoroscopy times Intraoperative blood loss

Received: 21 December 2020

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

URL:

http://dangdaiyiyao.com/EN/ OR http://dangdaiyiyao.com/EN/Y2021/V28/I20/96

[1]	刘彬.经皮椎间孔镜手术治疗腰椎间盘突出症的近期临床疗效观察[D].大连：大连医科大学，2018.
[2]	王国辉，潘进，杨燕，等.经皮椎间孔镜技术治疗腰椎间盘突出症的临床效果观察[J].中国当代医药，2017，24（25）：78-80，83.
[3]	张才铭.数字化设计及3D 打印技术精准治疗多发肋骨骨折的应用研究[D].南宁：广西医科大学，2018.
[4]	刘泽，赵建勇.3D 打印技术在骨科临床应用中的研究现状[J].河北医药，2017，39（2）：288-293.
[5]	陈孝平，汪建平，赵继宗.外科学[M].第9 版.北京：人民卫生出版社，2017：731-735.
[6]	李金盘，王清富，陈铁锋，等.经皮椎间孔镜腰椎间盘切除术和椎板开窗腰椎间盘切除术治疗腰椎间盘突出症的优劣差异[J].中国医药科学，2019，9（1）：204-207.
[7]	吴波.腰椎间孔镜的应用解剖[D].广州：南方医科大学，2017.
[8]	李莹，唐谨，吴从俊，等.椎间孔镜下治疗腰椎间盘突出症术后复发相关因素及再次处理效果探讨[J].中国中医骨伤科杂志，2018，26（11）：37-41.
[9]	徐亦鹏.3-D 打印个性化髋关节精确制备模板在全髋关节置换术中的应用[D].青岛：青岛大学，2017.
[10]	张亮，邱宏.3D 打印技术在医学领域的应用[J].中国医学装备，2018，15（6）：154-157.
[11]	韩曼曼.数字骨科技术在骨科辅助治疗中的应用研究[D].乌鲁木齐：新疆大学，2017.
[12]	叶试南，阮平，郑帮明，等.3D 打印技术对胫骨平台骨折关节面复位的应用价值及术后CT 结果研究[J].中国现代医生，2019，57（21）：21-23.
[13]	尹志强，赵瑛，刘盾.3D 打印技术在脊柱外科的临床应用研究进展[J].国际外科学杂志，2019，46（11）：780-783.
[14]	张学峥.腰椎的三维重建模型在腰4/5 侧入路椎间孔镜手术规划的应用研究[D].衡阳：南华大学，2017.
[15]	苏国义，李永津，陈博来，等.3D-MR 重建技术下经皮椎间孔镜治疗极外侧型腰椎间盘突出症[J].浙江医学，2017，39（16）：1369-1372.