[1] |
Pan HM.Advanced Materials in 3D/4D Printing Technology[J].Polymers,2022,14(16):3255.
|
[2] |
Cornejo J,Cornejo-Aguilar JA,Vargas M,et al.Anatomical Engineering and 3D Printing for Surgery and Medical Devices:International Review and Future Exponential Innovations[J].Biomed Res Int,2022,2022:1-28.
|
[3] |
Kauthankar A.WITHDRAWAL:Medical Imaging Technology,3D Printing and Medical Applications[J].Curr Med Imaging,2023,20:e651617114.
|
[4] |
Li LX,Kedgley AE,Horwitz MD.A Review of the Use of 3D Printing Technology in Treatment of Scaphoid Fractures[J].J Hand Surg Asian Pac Vol,2023,28(1):22-33.
|
[5] |
Ravi P,Chepelev LL,Stichweh GV,et al.Medical 3D Printing Dimensional Accuracy for Multi-pathological Anatomical Models 3D Printed Using Material Extrusion[J].J Digit Imaging,2022,35(3):613-622.
|
[6] |
Ardila CM,González-Arroyave D,Zuluaga-Gómez M.Efficacy ofthree-dimensionalmodelsformedicaleducation:Asystematic scoping review of randomized clinical trials[J].Heliyon,2023,9(2):e13395.
|
[7] |
Cai H,Cai H,Wang Z.Application of 3D printing navigation system in pediatric epiphyseal complex lesion surgery[J].Comput Assist Surg(Abingdon),2023,28(1):2174045.
|
[8] |
Wu S,Zeng J,Li H,et al.A Review on the Full Chain Application of 3D Printing Technology in Precision Medicine[J].Processes,2023,11(6):1736.
|
[9] |
Shokrani H,Shokrani A,Seidi F,et al.Polysaccharide-based biomaterials in a journey from 3D to 4D printing[J].Bioeng Transl Med,2023,8(4):e10503.
|
[10] |
Auricchio F,Marconi S.3D printing:clinical applications in orthopaedics and traumatology[J].EFORT Open Rev,2016,1(5):121-127.
|
[11] |
Prabhakaran P,Palaniyandi T,Kanagavalli B,et al.Prospect and retrospect of 3D bio-printing[J].Acta Histochem,2022,124(7):151932.
|
[12] |
Iftekar SF,Aabid A,Amir A,et al.Advancements and Limitations in 3D Printing Materials and Technologies:A Critical Review[J].Polymers(Basel),2023,15(11):2519.
|
[13] |
Sharma N,Cao S,Msallem B,et al.Effects of Steam Sterilization on 3D Printed Biocompatible Resin Materials for Surgical Guides-An Accuracy Assessment Study[J].J Clin Med,2020,9(5):1506.
|
[14] |
Bücking TM,Hill ER,Robertson JL,et al.From medical imaging data to 3D printed anatomical models[J].PLoS One,2017,12(5):e178540.
|
[15] |
Farooqi KM,Smerling J,Jorde UP.Application of 3D Printing Technology in Heart Failure[J].Heart Fail Clin,2022,18(2):325-333.
|
[16] |
Markovitz MA,Lu S,Viswanadhan NA.Role of 3D Printing and Modeling to Aid in Neuroradiology Education for Medical Trainees[J].Fed Pract,2021,38(6):256-260.
|
[17] |
Sharma KS.Artificial Intelligence Assisted Fabrication of 3D,4D and 5D Printed Formulations or Devices for Drug Delivery[J].Curr Drug Deliv,2023,20(6):752-769.
|
[18] |
Gross BC,Erkal JL,Lockwood SY,et al.Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences[J].Anal Chem,2014,86(7):3240-3253.
|
[19] |
Mankovich NJ,Cheeseman AM,Stoker NG.The display of three-dimensional anatomy with stereolithographic models[J].J Digit Imaging,1990,3(3):200-203.
|
[20] |
杨炳忻.香山科学会议第207-212 次会议简述[J].中国基础科学,2004,6(1):52-57.
|
[21] |
Zoabi A,Redenski I,Oren D,et al.3D Printing and Virtual Surgical Planning in Oral and Maxillofacial Surgery[J].J Clin Med,2022,11(9):2385.
|
[22] |
Sun J,Mu Y,Cui Y,et al.Application of 3D-printed osteotomy guide plates in proximal femoral osteotomy for DDH in children:a retrospective study[J].J Orthop Surg Res,2023,18(1):315.
|
[23] |
Upendra BN,Meena D,Chowdhury B,et al.Outcome-based classification for assessment of thoracic pedicular screw placement[J].Spine(Phila Pa 1976),2008,33(4):384-390.
|
[24] |
Radermacher K,Portheine F,Anton M,et al.Computer assisted orthopaedic surgery with image based individual templates[J].Clin Orthop Relat Res,1998,354(354):28-38.
|
[25] |
Li Y,Lin J,Wang Y,et al.Comparative study of 3D printed navigation template-assisted atlantoaxial pedicle screws versus free-hand screws for type Ⅱodontoid fractures[J].Eur Spine J,2021,30(2):498-506.
|
[26] |
Niu G,Cheng J,Liu L,et al.Individualized 3D printed navigation template-assisted atlantoaxial pedicle screws vs.free-hand screws for the treatment of upper cervical fractures[J].Front Surg,2022,9:932296.
|
[27] |
Wu C,Deng J,Hu H,et al.Operative Effect Comparison of Flexible Drill Guiding vs.Traditional Drill Guiding Template for Lower Cervical Pedicle Screw Insertion:A Retrospective Analysis[J].Orthop Surg,2023,15(7):1823-1830.
|
[28] |
Azimi P,Yazdanian T,Benzel EC,et al.3D-printed navigation template in cervical spine fusion:a systematic review and meta-analysis[J].Eur Spine J,2021,30(2):389-401.
|
[29] |
姜泽威,汤舒婷,周纪平,等.3D 打印导板辅助与徒手寰枢椎弓根钉置入比较[J].中国矫形外科杂志,2021,29(10):880-884.
|
[30] |
李佳佳,姜泽威,吴瑞,等.3D 打印导板辅助后路寰枢椎螺钉固定治疗齿状突骨折[J].中国矫形外科杂志,2022,30(14):1311-1313,1317.
|
[31] |
周建国,段永壮.3D 打印导向器椎弓根螺钉固定寰枢椎骨折脱位[J].中国矫形外科杂志,2021,29(12):1087-1090.
|
[32] |
Naddeo F,Fontana C,Naddeo A,et al.Novel design for a customized,3D-printed surgical template for thoracic spinal arthrodesis[J].Int J Med Robot,2019,15(4):e2005.
|
[33] |
Wang Y,Shi S,Zheng Q,et al.Application of 3-dimensional printing technology combined with guide plates for thoracic spinal tuberculosis[J].Medicine(Baltimore),2021,100(6):e24636.
|
[34] |
Kaya I,Cingz ID,Sahin MC,et al.Are 3D Printing Templates an Advantage in Upper Thoracic Pedicle Screw Fixation?[J].Cureus,2021,13(3):e13989.
|
[35] |
Petrone S,Marengo N,Ajello M,et al.Cortical bone trajectory technique's outcomes and procedures for posterior lumbar fusion:A retrospective study[J].J Clin Neurosci,2020,76:25-30.
|
[36] |
DiPernaG,MarengoN,MatsukawaK,et al.Three-Dimensional Patient-Matched Template Guides Are Able to Increase Mean Diameter and Length and to Improve Accuracy of Cortical Bone Trajectory Screws:A 5-Year International Experience[J].World Neurosurg,2023,170:e542-e549.
|
[37] |
潘玉军,时长江,穆怀昭,等.3D 打印个体化导航模板在腰椎螺钉植入中的应用效果及对患者腰椎功能应激激素的影响[J].河北医学,2022,28(7):1188-1194.
|
[38] |
杨义,曹广如,王翀,等.3D 打印胸腰椎结核模型及导板指导手术的精准与安全性[J].中国组织工程研究,2022,26(36):5798-5806.
|
[39] |
段修杨,王哲,于建林,等.3D 打印导板下椎弓根边界法置钉固定胸腰椎骨折[J].中国矫形外科杂志,2021,29(22):2093-2096.
|
[40] |
Vissarionov SV,Kokushin DN,Khusainov NO,et al.Comparing the Treatment of Congenital Spine Deformity Using Freehand Techniques In Vivo and 3D -Printed Templates In Vitro(Prospective-Retrospective Single-Center Analytical Single-Cohort Study)[J].Adv Ther,2020,37(1):402-419.
|
[41] |
李洪珂,董胜利,刘帅,等.3D 打印导航模板辅助置钉在脊柱侧弯术中的应用价值[J].生物医学工程与临床,2022,26(3):300-306.
|
[42] |
张之栋,祁家龙,裴少保,等.3D 打印导板技术联合多次去旋转治疗重度僵硬性脊柱侧凸[J].中国组织工程研究,2024,28(6):922-926.
|
[43] |
陈毅,赵亮,王利民.3D 打印辅助四级截骨术治疗创伤性脊柱后凸畸形30 例[J].中国中医骨伤科杂志,2021,29(2):41-44,48.
|
[44] |
Tu Q,Ding HW,Chen H,et al.Three-Dimensional-Printed Individualized Guiding Templates for Surgical Correction of Severe Kyphoscoliosis Secondary to Ankylosing Spondylitis:Outcomes of 9 Cases[J].World Neurosurg,2019,130:e961-e970.
|
[45] |
Xin X,Liu X,Zhu Y,et al.3D-Printed Guide Plate System-Assisted Thoracolumbar Kyphosis Osteotomy:A Technical Case Series[J].World Neurosurg,2023,173:28-33.
|
[46] |
赵永辉,马宇龙,罗浩天,等.3D 打印手术导板辅助强直性脊柱炎截骨矫形[J].中国矫形外科杂志,2020,28(24):2276-2280.
|
[47] |
张文玺,周金华,刘杰.3D 打印截面模型在腰椎全椎板减压中的应用[J].骨科临床与研究杂志,2021,6(5):295-300,306.
|
[48] |
Hu PL,Lin JS,Meng H,et al.A novel “three-dimensionalprinted individual guide template-assisted percutaneous vertebroplasty”for osteoporotic vertebral compression fracture:a prospective,controlled study[J].J Orthop Surg Res,2021,16(1):326.
|
[49] |
周金华,张文玺,刘国旗.3D 打印辅助经皮椎体成形术联合体位复位治疗骨质疏松性椎体骨折的效果观察[J].实用临床医药杂志,2021,25(12):58-60.
|
[50] |
胡佩伦,林吉生,费琦,等.3D 打印个体化导向板辅助经皮椎体成形术治疗双节段骨质疏松性椎体压缩骨折:新技术报道[J].颈腰痛杂志,2021,42(5):597-601.
|
[51] |
吴晓宇,赵文胜,陈琦,等.标杆型3D 打印导板在经皮椎体成形术中的初步应用[J].创伤外科杂志,2022,24(2):100-106.
|
[52] |
Chen J,Lin X,Lv Z,et al.Use of a 3D-printed body surface percutaneous puncture guide plate in vertebroplasty for osteoporotic vertebral compression fractures[J].PLoS One,2022,17(11):e276930.
|
[53] |
张愈峰.3D 打印导航板在椎间孔镜下腰椎髓核摘除术中的临床应用[J].中国脊柱脊髓杂志,2019,29(5):444-448.
|
[54] |
连学辉,肖红利,卢涛,等.3D 打印体外导板辅助经皮椎弓根螺钉固定术治疗胸腰椎骨折的临床疗效观察[J].中国脊柱脊髓杂志,2022,32(8):704-712.
|
[55] |
杨镇源,张继伟,邓强.3D 打印导板辅助经皮微创椎弓根螺钉置入治疗多节段腰椎骨折的疗效[J].实用医学杂志,2022,38(15):1930-1935.
|
[56] |
Zhang M,Li J,Fang T,et al.Application of 3-dimensional printing guide template and pointed lotus-style regulator in percutaneous pedicle screw fixation for thoracolumbar fractures[J].Sci Rep,2022,12(1):2930.
|